EPC Server - Your Resource for Engineering, Procurement, and Construction Support
USER IS NOT LOGGED IN
Log In Registration To Do List Online Analysis Developers Partnership About EPC Server



SCALED STRUCTURAL STEEL DETAILS
This Page Has Been Accessed 4980 Times


Ok Scales are relative. Since everyone uses different screen resolutions and different monitor sizes. The steel details are presented as scaled relative to itself. That is to say if the flange width is 12" and the deprh is 24" the section is represented with the flange width 1/2 the dimension as the beam depth. You may select small or large below for some varience. Note that a W36 will be shown much larger than a W12 because ... well it is larger.



Select Steel Section


Check for Small Detail( 5 x )

Check for Large Detail ( 10 x )
Or input your own magnification (may result in bad detail if too large or too small
Check if you want your detail dimensioned

Steel Details are Free




Try Our Message Board


Bringing Efficiency to the Construction Industry
EPC Server.com
Copyright © 2001,2002, EPCServer.com All rights reserved. All content in this site is provided 'as is' and no warranty is given as to the accuracy or suitability of any part hereof. No liability will be accepted for any direct or consequential losses, howsoever caused, following the use or misuse of any advice or information, real or implied, provided by this site.