USER IS NOT LOGGED IN		Log In Registration To Do List Online Analysis Developers Partnership About EPC Server

FOUNDATION/SOIL DESIGN





Information and formulas for determining failure of soils

Information on punching shear of soils

Formula for determining soil bearing pressure

Typical Soil Bearing Safety Factors

Frost Depth in the United States

Granular Column for Footing Support

Estimate of Internal Friction Angle

Relative Density of Sand through Testing

Undrained Shear Strength of Sand through Testing

Factors for determining soil bearing capacity - Terzaghi Model

Factors for determining soil bearing capacity - Meyerhof Model

Factors for determining soil bearing capacity - Hansen Model

Factors for determining soil bearing capacity - Vesic Model

Bearing Capacity for multi layer soils (Dense Sand over Soft Clay)

Average Allowable Bearing Pressures

Bearing stress reduction factor for large footings and mats

Bearing stress for Retaining Walls

Compare Attributes of Drilled Shafts vs. Driven Piles

Identification of deep loads and Restraints

Compression Capacity of single shaft




Try Our Message Board

Bringing Efficiency to the Construction Industry EPC Server.com

Copyright © 2001,2002, EPCServer.com All rights reserved. All content in this site is provided 'as is' and no warranty is given as to the accuracy or suitability of any part hereof. No liability will be accepted for any direct or consequential losses, howsoever caused, following the use or misuse of any advice or information, real or implied, provided by this site.